====== Setup EdgeRouter X as switch ======
This will guide you through the setup of the [[EdgeRouter X]] to be used as a switch. This currently is employed due to issues created by using a cheap switch with multiple UniFi APs.
===== Connect =====
  * Plug in using PoE injection or 12V 0.5Amp Power adapter
  * Connect computer to ETH0
  * Setup computer with 192.168.1.XXX address
  * Connect to EdgeRouter at 192.168.1.1
  * Probably need to accept any exceptions / agree to connect
  * Login with "ubnt" "ubnt"
===== Initial Setup =====
  * Run Wizards
    * Choose Switch
    * Select DHCP
    * Create new admin user (or keep existing users if changing from router to switch and not factory reset)
    * Apply