brimble.com

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Install HOOBS on Fedora 33 as Unraid Virtual Machine ======
This will guide you through the setup of HOOBS on an installation of [[Fedora 33]] as an Unraid Virtual Machine.
===== VM Settings =====
  * Autostart: Yes
  * Name: hoobs.33vX
  * Description: Hoobs
  * CPU Mode: Host Passthrough
  * Logical CPUs: 1
  * Internal Memory: 1024
  * Max Memory: 1024
  * Machine: Q35-4.1
  * BIOS: OVMF
  * USB Controller: 2.0 (EHCI) (I don't have USB 3.0 on current hardware)
  * OS Install ISO: select the fedora33 iso
  * OS Install CDRom Bus: SATA
  * Primary vDisk Location: Auto if on the array, below options for ssd
    */mnt/disks/samsung_ssd/hoobs.33vX/vdisk1.img            --> This one is vDisk on SSD (Current setup uses this)
    */dev/disk/by-id/ata-"ID OF DRIVE" --> This one is passthrough
  * Primary vDisk Size: 10G
  * Primary vDisk Type: raw
  * Primary vDisk Bus: VirtIO if on the array, below options for ssd
    * VirtIO         --> This one is vDisk on SSD (Current setup uses this)
    * SATA           --> This one is passthrough
  * Graphics Card: VNC
  * VNC Video Driver: QXL (best)
  * VNC Password: leave this blank (or set password if concerned folks will get access to unraid!)
  * VNC Keyboard: English-United States
  * Sound Card: none
  * Network MAC: whatever it is
  * Network Bridge: br0
  * USB Devices: none
  * Other PCI Devices: none

===== Install to Virtual Machine =====

  * Select Destination
  * Create User (Dirk Rockface / dirk) make them admin
  * Leave Root account disabled
  * Begin Installation


===== Setup =====
==== Update Packages ====
<code>sudo yum update</code>

==== Create ssh-rsa key auth ====
  * In home directory <code>mkdir .ssh</code>
  * authorized_keys file needs to have keys in them. Copy over from harddrive, external drive, or create them.

  * Turn off Password Auth<code>sudo vim /etc/ssh/sshd_config</code><code>UsePAM yes
PasswordAuthentication no</code><code>ChallengeResponseAuthentication no</code>
  * Also had to make similar changes in the file that is included in /etc/ssh/sshd_config.d/*.conf
    * but had to change folder permissions first to get in, then edit, then change back
  * Then had to make sure the user home folder was 700 (which it was), the .ssh folder was 700 (which it wasn't), and the authorized_keys file was 600 (which it wasn't).

===== HOOBS Prereq =====
<code>sudo hostnamectl set-hostname hoobs</code><code>sudo yum install -y nss-mdns avahi</code><code>sudo systemctl enable avahi-daemon.service</code><code>sudo reboot</code>

===== Install HOOBS =====

<code>wget -q -O - http://bit.ly/get-hoobs | sudo bash -</code>

==== Connect ====
  * Connect to either the internal IP or hostname if setup
  * Create User: Dirk Rockface / dirk
  * Install Plugins
    * Nest (Hoobs Certified) 4.5.3 at time of this wiki
    * myQ (Hoobs Certified) 2.6.2 at time of this wiki
==== Plugins Setup====
=== myQ ===
  * use credentials from myQ account.
=== Nest ===
  * Open a Chrome browser tab in Incognito Mode (or clear your cache).
  * Open Developer Tools (View/Developer/Developer Tools).
  * Click on 'Network' tab. Make sure 'Preserve Log' is checked.
  * In the 'Filter' box, enter issueToken
  * Go to home.nest.com, and click 'Sign in with Google'. Log into your account.
  * One network call (beginning with iframerpc) will appear in the Dev Tools window. Click on it.
  * In the Headers tab, under General, copy the entire Request URL (beginning with https://accounts.google.com, ending with nest.com). This is your "issueToken" in config.json.
  * In the 'Filter' box, enter oauth2/iframe
  * Several network calls will appear in the Dev Tools window. Click on the last iframe call.
  * In the Headers tab, under Request Headers, copy the entire cookie (include the whole string which is several lines long and has many field/value pairs - do not include the cookie: name). This is your "cookies" in config.json.
  * In the 'Filter' box, enter issue_jwt
  * Click on the last issue_jwt call.
  * In the Headers tab, under Request Headers, copy the entire x-goog-api-key (do not include the x-goog-api-key: name). This is your "apiKey" in config.json.
  * Do not log out of home.nest.com, as this will invalidate your credentials. Just close the browser tab.
brimble.com

User Tools

Site Tools

Page Tools
