brimble.com

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Install Portainer on Ubuntu as Proxmox Virtual Machine ======

===== Proxmox Settings =====
  * OS
    * Use CD/DVD disc image file (iso)
      * Storage: local
      * ISO image: select ubuntu iso (that you added to ISO section in Datacenter -> node name -> local (node name) -> ISO Images)
    * Type: Linux
    * Version: 6.x - 2.6 Kernel
  * System
    * Graphic card: Default
    * Machine: Default (i440fx)
    * BIOS: Default (SeaBIOS)
    * SCSI Controller: VirtIO SCSI single
    * Qemu Agent: UNCHECKED
    * Add TPM: UNCHECKED
  * Disks
    * Bus/Device: SCSI 0
    * Storage: local-lvm
    * Disk size (GiB): 100
  * CPU
    * Sockets: 1
    * Cores: 4
    * Type: host
  * Memory
    * 4096
    * Ballooning Device: CHECKED
  * Network
    * Bridge: vmbr0
    * Model: VirtIO (paravirtualized)
  * Confirm
    * Don't start vm after creation
    * Finish

===== Passthrough some stuff =====
  * Datacenter -> Node name -> VM
  * Click Hardware
    * Click Add
    * PCI Device
    * Raw Device
    * Device: Select the Device you want to add based on its address
      * For Portainer, I added the 1TB nvme for appdata etc. (04:00)
      * All Functions: CHECKED
    * Click OK

===== Setup Ubuntu =====
  * Start vm and go to console
  * Install Ubuntu with normal settings
    * Install OpenSSH server: YES
  * SSH into server
  * sudo apt update
  * sudo apt upgrade

===== Install Docker =====
  * <code>curl -faSL https://get.docker.com -o get-docker.sh</code>
  * <code>sudo sh ./get-docker.sh</code>
  * link: https://docs.docker.com/engine/install/ubuntu/

===== Install Portainer =====
  * <code>sudo docker volume create portainer_data</code>
  * <code>sudo docker run -d -p 8000:8000 -p 9443:9443 --name portainer --restart=always -v /var/run/docker.sock:/var/run/docker.sock -v portainer_data:/data portainer/portainer-ce:latest</code>
  * link: https://docs.portainer.io/start/install-ce/server/docker/linux

===== Setup Portainer =====
  * portaineraddress:9443
  * setup password
  * Add Containers!

===== Other =====
  * mount drives for dockers to use by editing /etc/fstab and adding the two below (for my needs)
  * <code>/dev/disk/by-uuid/6d9e10a7-bc8d-49c8-89ca-1b78be4c15e2 /mnt/nvme auto defaults 0 1
//10.23.79.4/plex /media/plex cifs credentials=/home/dirk/.dirksmbcred,file_mode=0777,dir_mode=0777 0 0</code>
  * create a .dirksmbcred file with your share user and pass info in your home directory.
  * <code>username=dirk
password=password</code>
brimble.com

User Tools

Site Tools

Page Tools
