Differences

This shows you the differences between two versions of the page.

--- unraid:virtual:hoobsu20.04 [2021/07/11 14:22] – created dirk
+++ unraid:virtual:hoobsu20.04 [2021/07/21 20:10] (current) – [VM Settings] dirk
@@ Line 6: / Line 6: @@
   * Description: Hoobs
   * CPU Mode: Host Passthrough
-  * Logical CPUs: 1
+  * Logical CPUs: 11
   * Internal Memory: 1024
   * Max Memory: 1024
@@ Line 15: / Line 15: @@
   * OS Install CDRom Bus: SATA
   * Primary vDisk Location: Auto if on the array, below options for ssd
-    */mnt/disks/samsung_ssd/hoobs.20.04vX/vdisk1.img            --> This one is vDisk on SSD (Current setup uses this)
+    */mnt/disks/samsung_nvme/vms/hoobs.20.04vX/vdisk1.img            --> This one is vDisk on SSD (Current setup uses this)
     */dev/disk/by-id/ata-"ID OF DRIVE" --> This one is passthrough
   * Primary vDisk Size: 10G
@@ Line 65: / Line 65: @@
 ==== Reboot ====
 <code>sudo reboot -h now</code>
-==== Install Pi-hole ====
 ===== HOOBS Prereq =====
-<code>sudo hostnamectl set-hostname hoobs</code><code>sudo yum install -y nss-mdns avahi</code><code>sudo systemctl enable avahi-daemon.service</code><code>sudo reboot</code>
+<code>wget -qO- https://dl.hoobs.org/stable | sudo -E bash -</code>
 ===== Install HOOBS =====
-<code>wget -q -O - http://bit.ly/get-hoobs | sudo bash -</code>
+<code>sudo apt-get install hoobs</code>
 ==== Connect ====

brimble.com